Features of Oil Purifier

Oil Purifier Machine is mainly used for purification of power plants, power station insulating oil, turbine oil and lube oil. Features as following:

1. The oil purifier machine can simultaneously complete the high content of dehydration and deep purification, in addition to remove impurities, acid, water impurities etc.

2. At the same time with oil filtration, coagulation and dehydration, box-type filtration, pressure filtration, vacuum drying combination.

3. The Oil Filtration Machine uses fuzzy control technology, reliable operation, long life, with pressure overload protection, automatic anti-dry, automatic foam eliminator, automatic oil level control;

4. Oil Filtration Machine comes with cooling water tank, custom cooling cycle;

5. The Oil Purifier can be synchronized online with the unit to remove water and discharge separated water online.

Difference of Vacuum Oil Purifier and Centrifugal Oil Purifier

Vacuum oil purifier with expansion, condensation, molecular adsorption, vacuum drying, mechanical filtration, fuzzy control and other combination of technology to remove water, impurities, soap, acid, pigments, so that the serious emulsification, transparent, up to the standards for hydraulic oil, thermal power insulating, industrial lube oil, etc. Main structure of the vacuum oil purifier consists of strainer, heater, vacuum cylinder, atomizer , vacuum pump, drain pump, cooler, temperature controller, precision filter and electrical control and other components.

Centrifugal Oil Purifier also calls Centrifugal Oil Separator works,  it has a rotor with a double jet nozzle that only needs the pressure generated by the oil to provide its driving force. After the equipment is turned on, the oil in the oil tank is sent to the rotor through the pump. After the oil is filled in the rotor, the oil is ejected along the lower nozzle of the turntable, thereby generating a driving force to rotate the rotor at a high speed. Its speed can reach more than 4000-6000r.p.m, which produces more than 2000 times the force of gravity. The principle of centrifugal force directly drives the separation of impurities from the oil. Hard and sharp abrasion of the metal material, coupled with those parts worn or deterioration of the residual oil, even the size of 1μm can be removed. Separated impurities attached to the rotor within the impurity collection cap, just regular cleaning can be. In addition, due to the proportion of water than oil, under the action of centrifugal force, the water separated from the oil exists in the rotor within the oil pan, just clear the cleaning can be. The filtered oil flows back to the tank directly by gravity.

To keep industrial equipment work longer, you need an oil system that minimizes oil loss and maintains a high level of cleanliness so your maintenance costs can be reduced. Now you will have the best oil system in the world: that is a true centrifugal oil purifier.

As the normal Oil Purifier is to complete the cleaning action with a filter element, their disadvantage is that small particles will easily pass or be completely blocked by large impurities, so that your u machine damage, and centrifuge rotor, then In addition to the impurities in the oil separated, it does not contain anything else, will not affect your oil and oil additives. Separating cleaning starts immediately after the engine is started, and it does not stop in the middle. Even when it handles more than 5 times the amount of waste it takes, the cleanliness of the oil can be maintained.