+86 132 06063693

sales@acorefiltration.comsales@acorefiltration.com
Transformer Oil Purifier
Transformer Oil Purifier for Onsite Filtration and Oil Filling November 1,2021.

The Double Stages High Vacuum Transformer Oil Purifier is a oil purification system used for on-site oil filtering, oil filling and vacuum evacuation. It is now a very popular mechanical equipment. The Vacuum Transformer Oil Purifier is an important auxiliary equipment for the production of petroleum. It has a wide range of uses in the on-site treatment of transformer oil, cable oil, switch oil, insulating oil, etc.. Use of industrial oil-after a period of time, water pollution and particle pollution will appear in the oil, which will accelerate the deterioration of the oil, accelerate metal fatigue and cause the insulating oil to lose the dielectric strength.


Vacuum Transformer Oil Filtration Machine can dynamically process oil without stopping production, reduce production and operating costs, prevent the burning and discharge of waste oil, and avoid environmental pollution caused by this. At present, there are many Transformer Oil Purifier Manufacturers in China. Compared with foreign oil purifiers manufacturer of the same specification, technical is very closed. The energy consumption is same, the structure is reasonable and the quality is also very closed. 


When the Vacuum Transformer Oil Purifier is working, the insulating oil that needs to be filtered enters the strong magnetic filter (filtration accuracy 80u) under the action of vacuum suction to filter out large particles of impurities, and then enters the heater to heat (200-80), and the hot oil is heated from The spray device turns into coarse grains and enters the three-dimensional vacuum flash tower. The water starts to evaporate. The oil mist falls on the three-dimensional flash Pall ring, forming a very thin oil film (thickness of 0.025mm), and the oil film curve moves downward, resulting in a larger The aeration area and aeration time are maintained during the process, so as to carry out sufficient demulsification, dehydration and degassing separation processes. The mixed gas formed by vaporized water vapor, light hydrocarbons and other gases enters the water-gas separation device, the precipitated water is directly discharged, the water vapor and non-condensable gases enter the vacuum buffer chamber, and the cooling water is directly discharged. The condensed gas is discharged by the vacuum pump. As Oil Purifier Manufacturers, Acore Filtration Co.Ltd can design and produce various oil filtration machines according to client’s requirement. Please contact us at: sales@acorefiltration.com

Previous Post Next Post

Copyright © 2024 Acore Filtration Co. Ltd.

Request A Quote

Request A Quote