After several years of development, the Oil Purification industry has undergone breakthrough changes in the technical field. Especially for Transformer Oil Purification Process, Acore Filtration Co.,Ltd as a manufacturer of oil purification plant has been in improving its technology and quality. Therefore, the Transformer Oil Purification Plant is an ideal equipment for the recovery and treatment of waste electric dielectric insulating oils.

Chinese Oil Purification Process technology has developed rapidly with the increase in domestic and foreign demand, and new breakthroughs in Oil Purification technology are technically humanized automation. It is a good and practical intelligent oil purification plant in China at present. The oil is filtered directly, and the oil products reach the standard without pollution.

Depending on the requirement of dielectric strength of insulating oil. For low and medium voltage transformers, the dielectric strength requires 50-60KV, which can use our VTP Transformer Oil Purification Plant. For high voltage and super voltage transformer, especially more than 110KV. Our DVTP double stages high vacuum Transformer Oil Purification Plant is very suitable.

Due to the leakage of the power system, the particulate dust in the air enters or the system wears off the dust. The oil will work under high temperature and water for a long time, which will inevitably cause part of the oil to crack and deteriorate and precipitate the gelatinous substance. Because the power system leaks and seals tightly, the oil is in the heat load open oil storage for a long time, and the moisture gas in the air penetrates into the oil, resulting in water containing gas in the oil. So Oil Purification is very necessary for recovering insulating performance of oil.

The connecting pipes (including the oil tank) of Transformer Oil Purification Plant must be thoroughly cleaned in advance and have good sealing. When the Transformer Oil Purification Plant is used on site, it should be closed to the transformer or oil tank as possible. The oil suction pipeline should not be too long to minimize the pipeline resistance. The cables and tubing used must be dedicated.

The function of the Oil Purification Process is precision filtration and dehydration, which can effectively remove particulate impurities and emulsified water and free water in the oil. Since it is not heated, the additives in the oil are not cracked and deteriorated, thereby not harming the quality of the product. For oils containing a lot of water, the separation effect is particularly significant, the main purpose of the oil purification is to remove water and impurities in the oil. Contact us: sales@acorefiltration.com.