ACORE invents automatic oil foam eliminator for our Vacuum Transformer Oil Filtration Machine, which solve the problem of foam injecting. If there is no foam eliminator, after the oil is heated, it enters the vacuum oil-water separation chamber with vacuum pressure. Since the heated oil contained moisture is sprayed, a large amount of foam can be generated, and the foam will rapidly rise to the top of the vacuum chamber and be pumped out by the vacuum pump, causing the vacuum pump to inject oil

After Transformer Oil Filtration Machine installs foam eliminator, after the heated oil enters the vacuum chamber with vacuum pressure. Since the heated oil contains moisture, the heated oil is sprayed, a large amount of foam can be generated, then foam will go into foam eliminator automatically, which can reduce foam. At same time, it doesn’t reduce the vacuum pressure in the vacuum chamber.

If the oil to be treated is higher than the Vacuum Oil Purifier, when the sudden power failure or the filter element of Vacuum Oil purifier clogging alarm stops, because the oil to be treated is higher than the vacuum Oil Purifier the treated oil will be in its own weight. In the Oil Filtration System that is overwhelmed, when the space in the vacuum oil filtration system is full, the oil will be pressed out along the air outlet of the vacuum pump.

If the oil inlet and outlet balance: If the oil to be treated is higher than Oil Filtration System, the oil inlet solenoid valve will automatically close and stop the oil when the power is suddenly turned off or the filter element Transformer Oil Filtration Machine is blocked.