The design of the Vacuum Transformer Oil Purification Plant has the characteristics of small size, light weight ratio, convenient movement, low noise, long continuous working time, stable performance, and convenient operation. It is an ideal Oil Purification Equipment for power industry, manufacturing plants, industrial and mining enterprises to filter water, gas and impurities in transformer oil, insulating oil, dielectric oil, cable oil, switch oil, etc.

The working principle and purification process of Transformer Oil Purification Plant:

When the oil purification equipment is working, the oil enters the primary filter through the inlet under the effect of the internal and external pressure difference, and the large particles are filtered out. After the oil is heated by multi-stage infrared rays, it enters the special personalized vacuum separator and separates in the vacuum. The device is first formed into a slender shape, and then a film shape, so that the contact area in the vacuum is enlarged hundreds of times. The water in the oil can be quickly obtained under the conditions of high heat, high vacuum, large surface, and high pumping speed. Vaporized and discharged from the vacuum system, the water vapor discharged from the upper part of the vacuum separator is first cooled and dehumidified by the condenser, then enters the cooler to cool again, the condensed water enters the water reservoir and is discharged, and the gas after being condensed and dehumidified twice, finally It is discharged into the air by the vacuum pump.

The dry oil in the vacuum separator of Oil Purification Equipment is vacuum vaporized and dehydrated, and the oil pump is increased from negative pressure to positive pressure. After filtration, the net oil is discharged from the oil outlet to complete the entire net oil process.

The Transformer Oil Filter Machine is mainly used to increase the insulation value of the transformer insulating oil during the process of injecting new oil into the transformer. The transformer insulating oil in the oil tank enters the transformer after being filtered by a vacuum Transformer Oil Filter Machine and degassed and dehydrated. The transformer vacuum oil filling is a separate vacuum pump device that vacuums the transformer at the same time to obtain the best effect.

1. If the distance between the oil tank and the vacuum Transformer Oil Filter Machine is far, an oil filter press plays a role in filtering and pressing.

2. When the Transformer Oil Purification Equipment is used to purify and filter the used transformer insulating oil on site, an online or offline cycle purification method is adopted.

3. When there are multiple oil tanks on site, oil can be filtered between two different oil tanks to achieve the purpose of improving oil quality.

4. When there is only one oil tank on site, an Transformer Oil Purification Plant can be used to circulate the oil inside to improve its oil quality and facilitate the oil filling of the transformer in the next step.