At present, almost all vacuum Turbine Oil Dehydration and Filtration Machine has the following aspects:

1. Using large-area multi-stage vacuum oil-water separation technology, turbine oil dehydration rate is high, especially for crude oil with high water content.

2. Adopt multi-stage filter element, acid and alkali resistance, corrosion resistance, high temperature resistance, service life of up to 10 years.

3. Adopt backwashing technology to reduce manual cleaning caused by clogging of beach nets and effectively improve work efficiency.

4. With a variety of configurations, the device has five functions of degassing, dehydration, demulsification and purification at the same time to meet the requirements of one machine for multiple purposes.

5. The computer-based automatic vacuum Turbine Oil Purifier adopts a good system and control theory, and uses the computer in the equipment to automatically control its emptying, heating, liquid level, defoaming, aeration, oil pump, valve, start and stop, etc. The whole process. Turbine Oil Filtration Machine can work normally, no power outage, no oil change. Purify the dirty oil that has failed due to the increase of moisture, gas and impurities, so that the oil can reach the qualified standard.

Vacuum Turbine Oil Purifier have many technologies, including vacuum dehydration, separation engineering, coagulation, adsorption and compact filtration. It can quickly and reliably remove water, gas, impurities, gum, sludge and various pigments from oil under high vacuum. Reduce dielectric loss and acid value, increase the degree of demulsification, and improve oil quality in many aspects. Turbine Oil Filtration machine can realize online operation, automatic drainage without stopping, so that the waste oil can reach the standard of new oil, and the operation is simple.

During the long-term operation of steam turbines in power plants and power stations, due to various complex reasons, moisture, dust and solid particulate impurities are inevitably mixed into the steam turbine oil, which accelerates the oxidation of the oil and promotes the formation of foam, scale and sludge. Seriously emulsify the oil, make oil-water separation difficult, and reduce the lubrication, anti-wear, heat dissipation and cooling properties of the oil. So Using Turbine Oil Dehydration and Filtration Machine to clean the turbine oil can recover the quality of oil, and improve the performance of turbines.