Vacuum Oil Purifier is oil purification equipment widely used in various industries. It is mainly used in power plants, power stations, petrochemicals, machinery, power companies, substation industries, metallurgy, oil refineries, transportation, railways, paper mills and other industries. The most effective auxiliary equipment for industrial oils such as transformer oil, turbine oil, engine oil and hydraulic oil. The Vacuum Oil Purifier adopts a super large-volume three-dimensional evaporative degassing and dehydration vacuum system, combined with a super large area "coalescing separation" dehydration technology, to achieve multi-level oil-water separation and rapid separation of water and gas in the oil. This Oil Purifier has advanced design of oil purification technology. It can be connected to the hydraulic oil tank (oil station) process to match online or offline purification processing. It has a high degree of automation and can realize unattended operation.

Plate and frame oil filter press is a portable Oil Purifier Machine which is composed of gear pump, filter, safety valve, oil return valve, filter bed, rear bracket, chassis, tie rod, coupling, motor and other components. The gear pump, coupling and motor are installed on the chassis, and the filter is installed on the front side of the gear pump. An oil return valve is installed on the filter, and the filter bed is installed above the gear pump, during which the filter plate and frame alternately form a filter chamber. The filter paper is clamped between the filter plate and the center of the filter frame. The oil inlet and outlet hoses are connected to the inlet and outlet pipe joints. When the oil is sucked in from the oil inlet of the filter, the larger particles are removed by the filter, and then it enters the gear pump. The gear pump rotates under the drive of the motor to generate squeezing force, so that the oil enters the filter bed and penetrates out of the filter paper to filter the oil magazine. Then sweep the oil out of the oil outlet pipe. When the oil pressure exceeds the specified value. The safety valve is immediately activated to allow the oil to circulate in the oil pump by itself, and the oil pressure will no longer rise to ensure the safety of the equipment. The oil sample valve is used to take oil samples for pressure resistance and other physical and chemical function tests. This Plate and frame Oil Purifier Machine adopt chassis roller structure. It can be moved by pulling the lever manually.

The plate and frame Oil Purifier Machine is a good choice for power plants, substations, power supply stations, oil depots and related companies to purify transformer oil, capacitor oil, spindle oil and insulating oil, remove impurities, and improve the pressure resistance of the oil. It has a good purifying effect on oil.

Vacuum Turbine Oil Purifier uses the principle of negative pressure heating to vaporize and separate the water contained in the oil in a high vacuum. As high efficiency of Turbine Oil Purifier in separating water, gas, and impurities, it is often used to purify oil with higher requirements, and it has a better effect on oils that contain water. Generally used in large industrial and mining enterprises and the power industry.

Vacuum Turbine Oil Purifier can also be used for the purification treatment of lubricating oil and hydraulic oil. It can effectively remove the moisture, gas and impurity particles in the oil, improve the insulation strength and oil quality, ensure the safe operation of electrical equipment, and can advance the hot oil cycle drying of electrical equipment, turbine oil injection, turbine pumping, etc.