The Oil Purifier is an equipment that is used in many industrial oil fields. It generally removes impurities in the oil through filtration. Since the key to removing impurities in the oil is the filter element, which ensure the quality of the Oil Purifier. The contaminated liquid is cleaned to the state required for production and life, that is, the liquid reaches a certain degree of cleanliness. The filter element of the Oil Purifier includes stainless steel mesh filter element, coarse filter element, secondary filter element, fine filter element, water separation filter element, coalescence filter element, separation filter element, etc. It is very important to select the filter element used in the Hydraulic Oil Purifier. The main points for choosing the right filter element are as follows:

1. The manufacturer of Oil Purifier will match the corresponding coarse filter and fine filter according to the Hydraulic Oil Filter Machine model and technical requirements. The user should purchase the same specification filter element when replacing the filter element in the future. If other specifications of the filter element are used, it may cause insufficient filtration accuracy, or reduce the filter area of the filter element, insufficient dirt holding capacity, and increase the frequency of filter element replacement, resulting in high use of the old cost.

2. We have to choose from the filter accuracy of Hydraulic Oil Purifier, and choose the appropriate filter element to filter our accuracy. (Select according to the different types of filtered hydraulic oil, the degree of oil pollution, and the requirements to achieve the filter index. The accuracy of the filter element, the accuracy of the filter element is 1µm～200µm, etc.)

3. Certain processing needs to be taken into consideration for the amount of oil filtered by the Hydraulic Oil Purifier, so as to better complete our filter element selection. (For specific parameters, please ask the oil filter manufacturer)

4. The primary filter of the Hydraulic Oil Purifier is a stainless steel filter element, which has good corrosion resistance, heat resistance, pressure resistance and wear resistance. It can be used again after washing, and the filter precision of 30-200µm can be selected without replacement.

5. The filter mesh of the primary filter element of the Hydraulic Oil Filter Machine should be removed and cleaned frequently to keep it clean to avoid clogging and causing insufficient oil intake or excessive pressure. When it is found that the oil intake of the Hydraulic Oil Purifier becomes small, it means that the filter mesh of the primary filter has increased impurities and needs to be cleaned immediately; due to the high filtration accuracy of the fine filter element, the cleaning effect is not good, and it is easy to cause the filter material to be damaged, so the use of the fine filter element After a certain period, it can only be replaced. For more information, contact us at: sales@acorefiltration.com.