+86 132 06063693

sales@acorefiltration.comsales@acorefiltration.com
Transformer Oil Filtration Machine
Mobile Transformer Oil Filtration Machine With Double Stages Vacuum January 29,2019.

ACORE Mobile Transformer Oil Filtration Machine has strong ability to remove impurities. large-area and deep-level precision filter material can remove fine particles in oil. It has automatic flushing function, automatically cleans the filter to trap a large amount of impurities, and adopts unique stainless steel folding swirling degassing. In addition to the water separation tower, the separation area is increased to make the oil thin film evaporate, and the multi-layer oil-water separation technology rapidly separates the moisture, gas and impurities in the oil to obtain sufficient vaporization time to ensure the effect of one separation.


Transformer Oil Filtration Machine pressure protection, temperature control heating uses automatic signal acquisition and control system, condensate water device uses new technology to automatically remove water, simple, safe and reliable operation, using high-quality filter material, precision filter, scientific design, domestic filter and Imported filter elements are interchangeable. Suitable filter materials are selected for different oil quality requirements. The cost of Transformer Oil Treatment effect can be taken into account. The filter has large dirt absorption, corrosion resistance, high temperature resistance, good mechanical strength, high impurity precision and long service life. The electrical control system uses imported electrical appliances to ensure high-performance and safe operation of the equipment. The oil pump uses a special oil pump and special treatment for the seal, no leakage, low operating noise and long service life.


Vacuum Transformer Oil Filter Machine is widely used in power plants, power stations, power companies, metallurgy, petrochemical, machinery, transportation, railway and other industries. It is mainly used for large-scale transmission and transformation voltage equipment above 110KV and national main transformer grid. And the rapid deep treatment of insulating oil such as new oil and imported oil, vacuum filtration, vacuum drying and vacuum oil filtration treatment of relatively expensive oils such as new oil, imported oil, transformer oil and transformer system capacitor oil and refrigeration oil. The indexes of the Vacuum Transformer Oil Filtration Machine products are much higher than the national standards. Compared with the single-stage vacuum oil filter, the dehydration, degassing and impurity removal (mechanical impurities and free carbon) are faster and more thorough, and the oil limit is resistant. The pressure value and flash point are higher, and the primary filter breakdown voltage can be increased by 35KV, which reduces the damage of the oil filter due to repeated heating of the general oil filter.


The Transformer Oil Filtration Machine meets the needs of vacuum or vacuum oil filling, vacuum oil filling and vacuum pumping of the transformer body at the installation or maintenance site, which greatly shortens the oil treatment period, unique degassing and dehydration system, and complex three-dimensional flashing. Rapid removal of liquid water, using UK micro-gram technology, can effectively remove trace water such as dissolved water, efficiently complete degassing, dehydration, Transformer Oil Treatment, improve oil insulation strength and oil content. Excellent filter system for Transformer Oil Filter Machine, double mesh filter and polymer material filter combined with impurity removal technology, high quality filter, step-by-step encryption technology, multi-stage precision filtration, high filtration precision, large scale capacity, High strength and long life.


When the Transformer Oil Filtration Machine works, the oil enters the primary filter through the inlet under the action of the pressure difference between the inside and the outside, and the large particle impurities are filtered out. After the oil is heated by the multi-stage infrared, it enters the special personalized vacuum separator in the vacuum. The separator is first formed into a mist shape, and then formed into a film shape, so that the contact area in the vacuum is expanded by several hundred times, and the water in the oil is obtained under conditions of high heat, high vacuum, large surface, and high pumping speed. Rapidly vaporized and discharged by a vacuum system. The water vapor discharged from the upper part of the vacuum separator of the Transformer Oil Treatment is first cooled and dehumidified by the condenser, then cooled into the cooler, and the condensed water is discharged into the water storage device.

Previous Post Next Post

Copyright © 2024 Acore Filtration Co. Ltd.

Request A Quote

Request A Quote