MTP Mobile Vacuum Transformer Oil Purification Plant from ACORE Filtration Co.Ltd is designed and produced for the regeneration and filtration treatment of unsuitable transformer oil, cable oil, switch oil and other insulating oils. Meanwhile, It also can be used for transformer vacuum drying and oil-filling.

MTP Mobile Vacuum Transformer Oil Purification Plant is suitable for construction, installation, maintenance and on-site maintenance of ultra-high voltage and ultra-high voltage large-scale power transmission and transformation equipment above 110KV. This plant is used as a deep purification treatment for high grade new oil, imported oil, transformer oil, ultra-high voltage transformer oil and other oils.

MTP Mobile Transformer Oil Purification Machine adopts the two-stage high vacuum design, this series of models is more advantageous at high altitudes. It can also be used for deep dewatering of oils such as capacitor oils, air conditioner compressors, and oils requiring low water content and low oil. This transformer oil purification plant has the functions of vacuum oil injection and vacuum pumping, which can meet the functions of vacuum drying and hot oil circulation filtration on the construction site.

The Vacuum Transformer Oil Purification Machine is mainly suitable for all kinds of insulating oil used in high voltage transformer, current transformer, capacitor, circuit breaker, switch and other electric equipment. The oil purification machine can clean and treat the insulation oil such as transformers, transformers and oil switches that are degraded without power failure.

Features:

A: On the basis of the original vacuum Oil Purification Process, MTP Vacuum Transformer Oil Purification Machine made a greater improvement, and a multi-stage negative pressure filtration horizontal structure was adopted. The bipolar vacuum performance was stable and advanced, the electrical design and installation were reliable, the appearance structure was compact, and the structure was reasonable and novel.

B: Transformer Oil Purification Process has a short regeneration cycle, low energy consumption, no filter paper and fragile materials, and high degree of automation. The automatic control protection device is light and flexible, consumes less power, has low noise, and is easy to operate. The non-replacement filter element reduces the cost by more than 90% compared with the traditional insulating oil treatment method.

C: The polymer composite filter material directly removes free carbon from the electric insulating oil. Effectively ensure the filtration accuracy of the oil quality, that is, the cleanliness, and the oil purification plant adds automatic backwashing.

D: vacuum pump oil emulsion cycle system and vacuum circulation cooling device, water cooling, air cooling arbitrary switching, completely solve the drawbacks of winter freezing in the northern region can’t operate normally. Eliminate the problem of easy emulsification of oil for long-term operation of vacuum pump. MTP Mobile Vacuum Transformer Oil Purification Plant can be used as a stand-alone unit or in combination with a regenerative adsorption unit.