Turbine Oil Purification Plant is specially designed for filtration and dehydration of steam turbine oil, hydraulic turbine oil, gas turbine oil, etc. Turbine oils are generally used in the reduction gears, sliding bearings, hydraulic control system lubrication and governors of connected units. The main functions of steam turbine oil are cooling, speed regulation and lubrication.

Principle of Turbine Oil Purifier

Turbine oil purifier, also known as turbine oil purification plant, is a physical process based on the different boiling points of water and oil. It consists of main filter, heating system, fine filter, condenser, vacuum tank, and fine filter. Water tank, vacuum pump, oil drain pump, etc. The vacuum pump extracts the air in the vacuum tank to form a vacuum, and the outside oil enters the main filter through the water inlet pipe to remove large particles and then enters the heating tank. After heating, the oil enters the vacuum tank through a solenoid valve, which can automatically control the balance of the amount of oil in and out of the vacuum tank. The heated oil turns into oil mist and enters the vacuum tank. The water in the oil quickly evaporates into a steam atomizer and is sucked into the condenser of the vacuum pump. The water vapor passes through the liquid water on the back of the condenser and discharges. The gas in the oil is quickly discharged by the vacuum pump. Then drain the clean oil.

Features of Acore Turbine Oil Purifier

1. It adopts multi-stage cartridge filter with strong ability to filter out impurities. The coarse filter uses a large-flow cleanable filter element, which can remove a large amount of impurities in the oil; the precision filter element, using the "gradual density" technology, can remove particles in the oil.

2. Use high-quality filter elements and connection sealing materials with corrosion resistance, high temperature resistance, and high mechanical strength; use German imported water ring vacuum pumps, using coolant (or water) as lubricating medium, without fear of gas entering the vacuum pump.

3. The Turbine Oil Purifier adopts a new type of heating device with low heating load to avoid oil aging.

4. The anti-fuel injection device adopts the photoelectric liquid level control method, which is sensitive and accurate, and can sense even foam, and no fuel injection occurs.

5. Our company has launched a new vacuum & coalescing Turbine Oil Purification Plant which combines the advantages of Vacuum Oil Purifier and coalescing oil purifier into one, which not only solves the financial problem of users buying imported coalescing oil filter, It overcomes the problem of low automation of Vacuum Oil Purification Plant. Contact us: sales@acorefiltration.com.