DVTP series double stages high Vacuum Transformer Oil Treatment Machine is an oil purification plant for dielectric oil. Through precision filtration and vacuum heating treatment, the impurities and water removal to achieve the purpose of improving the dielectric strength of the oil.

DVTP series double stages high Vacuum Transformer Oil Treatment Machine adds new functions, which is more convenient and reliable.

(1) Automatically restore the vacuum tank normally when shutting down to prevent the vacuum pump from overflowing in oil.

(2) Digital time control function.

(3) Transformer Oil Purification Plant use gear pump instead of the gear pump greatly reduces the noise and increases the vacuum.

(4) Use the digital current meter to monitor the working conditions of the heater, observe the changes in the current, and determine whether the heater is normal

(5) Use automatic liquid surface control technology to make vacuum tanks ultimate state and improve work efficiency.

DVTP Vacuum Transformer Oil Purification Plant is composed of oil level limiter, oil tank, air dryer, vacuum pump, roots pump, oil pump, oil filter, control box, snake -shaped oil pipe, partition, heater. The oil is to enter the heater after entering the oil from the bottom and the oil after treatment, and then enter the heater. This not only saves the thermal energy, but also reduces the oil outlet temperature and improves the performance. Because the barrier in the oil tank can fully contact the dry air in a low vacuum state, to achieve the ideal water removal effect. There is an oil level control device in the lower part of the vacuum tank. The heater of Transformer Oil Treatment Machine is arranged in multiple sets of upper and lower arranges. The heater can improve the heating efficiency and improve the oil filtration effect.

When the Vacuum Transformer Oil Dehydration Plant is working, the oil first enters the heater through the internal and external pressure differences for heat exchange heating; Under the action of pressure differences, the oil continues to enter the specially personalized water splitter. Because the water signs adopt the enhanced hydrophilic and hydrophobic technology, the interaction force of oil molecules and water molecules is used to make the fine water droplets in the oil in the oil in the oil in the oil. Accelerate the movement and gather into a large droplet from the oil from the oil, precipitated in the water reservoir and being discharged.

Vacuum Transformer Oil Purification Plant remove a large amount of water and then enter the vacuum separator with extremely low air pressure. The internal use of molecular separation technology to perform transformer analysis, vacuum detention, and internal emergency three -dimensional evaporation of the oil , Eliminate the binding force between molecules, so that the solubility water, dissolved gas, free water, free gases such as dissolved water, dissolved gases, free water and free gases are precipitated from the oil. The formation of the membrane has expanded its contact area to hundreds of times. The moisture contained in the oil is quickly vaporized under high fever, high vacuum, large surface, and high speed. The fine particles of impurities are filtered out, the oil continues to enter the essence filter under pressure under pressure, which is the filter material of the composite microporous structure, which can effectively filter the ultra -microphone miscellaneous in the oil removal. The oil flowing out of the oil outlet is clean oil to complete the purification process of oil.