The Vacuum Transformer Oil Filtration Machine can quickly remove the gas, trace moisture and mechanical impurities in the oil, thereby improving the dielectric strength of the oil, so that the purified oil meet the standard of new oil. The transformer filtration machine is used in the power industry, substation, transformers, switches and other electrical equipment.

Vacuum Transformer Oil Filtration Machine is designed according to the different boiling point of water and oil. It consists of condenser, water tank, vacuum heating tank, fine filter, primary filter, oil pumps, vacuum pumps and electrical cabinet. The vacuum pump does evacuation in the vacuum tank to form a vacuum. Under the action of atmospheric pressure, the external oil enters the primary filter through the inlet pipe. This step removes the larger particles and then enters the heating tank. After heating, the oil passes through the automatic oil valve. The valve is automatically controlled to enter and balance the amount of oil entering the vacuum tank. The heated oil is rapidly swirled by the spray wings to separate the oil into a semi-mist, and the water in the oil is rapidly evaporated into water vapor and continuously sucked into the condenser by the vacuum pump. The water vapor entering the condenser is cooled and returned to the original water to be discharged. The oil in the vacuum heating tank is discharged into the fine filter by the oil discharge pump, and then the particulate impurities are filtered out through the oil filter paper or the filter element to complete the vacuum oil filtering. Quickly remove the impurities, moisture and gas from the oil, so that the clean oil is discharged from the oil outlet. After cooling and returning to the original water release, the oil in the vacuum heating tank is discharged into the fine filter by the oil discharge pump, and then the particulate impurities are filtered out through the oil filter paper or the filter element, thereby completing the vacuum filter oil to quickly remove impurities and moisture in the oil. And the whole process of the gas, so that the clean oil is discharged from the oil outlet.

Vacuum Transformer Oil Treatment Plant is widely used in power plants, power stations, power companies, substation industries, railways, petrochemicals, metallurgy, etc. It can also be used to purify various low-viscosity lubricants, restore and improve the compressive strength of electrical insulating oils, etc.

When using Transformer Oil Treatment Plant do vacuum oiling and vacuum the equipment, connect the initial port of the vacuumed equipment to the vacuum pumping port of the transformer oil filter machine, open the valve, close the valve and the external valve, and open the vacuum pump. The transformer oil filtration machine can reach the vacuum state after the vacuum pump has been working continuously, and the vacuum degree can be observed from the vacuum gauge.

the operation of vacuum oil filling:

1. Connect the oil inlet of the positive oil injection equipment to the oil outlet of the vacuum Transformer Oil Filter Machine, the oil inlet is connected with the oil drum, and the vacuum suction port is connected with the vacuum oiling equipment to open the oil outlet valve.

2. Start the vacuum pump and vacuum the equipment. When the vacuum reaches the required value, open the inlet valve and start the oil pump. The oil is injected into the equipment under the action of the oil pump.

3. When the oil level reaches a certain value, close the oil pump, so that the vacuum Transformer Oil Filtration Machine can achieve the purpose of vacuum oiling while vacuuming the equipment.