+86 23 81324618

sales@acorefiltration.comsales@acorefiltration.com
Lube Oil Purifiers
Vacuum Turbine Lube Oil Purifier With Coalescence Separating Technology November 28,2019.
The design of Vacuum Turbine Lube Oil Purifier is composed of main filter elements, heating system, fine filter, condenser, coalescence oil-water separator, vacuum dehydration and degassing chamber, fine filter, vacuum pump, oil drain pump and electric cabinet, etc. The vacuum pump extracts the air in the vacuum tank to form a vacuum, the effect of the atmospheric pressure of the outer oil, enters the main filter through the water inlet pipe to remove large particles, and then enters the heating tank. After heating, such as 40-60 °C, the oil enters the vacuum tank through a solenoid valve. This valve can automatically control the amount of oil flowing in and out of the vacuum tank. The heated oil turns into an oil mist and enters the vacuum tank. The moisture in the oil quickly evaporates into a steam sprayer and is sucked into the condenser of the vacuum pump. Water vapor passes through the liquid water on the back of the condenser and discharges. The gas in the oil is quickly exhausted by the vacuum pump. After the vacuum tank, the oil that has passed through the fine filter separates the particles and then drains the clean oil.
 
The Vacuum Turbine Lube Oil Purifier is mainly used to treat unqualified turbine oil, especially suitable for severely emulsified turbine oil. It can quickly and easily remove water, gas and impurities in the oil. Make the quality indicators of oil products reach the new oil standard and ensure the safe operation of steam turbine units. This Turbine Oil Purifier uses special high-molecular material as the medium, and integrates emulsification, dehydration, and impurity removal as a whole. Combined with vacuum separation technology, it can demulsify, dehydrate, remove acid, and remove impurities online, so that the severely turbid emulsified turbine oil becomes clear. The Vacuum Oil Purifier is an ideal equipment for on-line processing of turbine oil, low viscosity lubricating oil and hydraulic oil.
  
Turbine oil (turbine oil) exists in three forms: water-in-oil, oil-in-water and dissolved water. After the small droplets pass through the emulsifier filter in the demulsifying, capillary condensation occurs. The small droplets become large droplets and are separated from the oil. The large water droplets are continuously accumulated on the bottom of the demulsifying by gravity and drained. The valve is discharged, and the dissolved water is continuously evaporated under heating in a vacuum state, and is removed by a vacuum pump. After the water is removed, the mechanical fluid is removed by a fine filter to achieve the purpose of comprehensively purifying the oil.
 
The Vacuum Oil Purifier for turbine oil is used for turbine generator set adjustment and lubrication system. It will be mixed with steam, water or impurities to varying degrees during operation. It needs frequent maintenance and treatment. Otherwise, it may accelerate oil quality deterioration or cause adjustment, Failure of the protection system and damage to the bearing pads affect the safe operation of the unit.

The Vacuum Turbine Lube Oil Purifier is specially developed and produced according to the characteristics of large impurities in turbine lubricating oil. It has a short processing cycle and high efficiency, and can quickly remove moisture, gas, impurities and volatiles (such as alcohol, gasoline, Ammonia gas, etc.). The Turbine Oil Purifier improves oil quality, restores lubricating viscosity, flash point and performance. Contact us: sales@acorefiltration.com for good price and service.
Next Post

Copyright © 2020 Acore Filtration Co. Ltd.

leave a message

leave a message