- Double Stages High Vacuum Transformer Oil Purifier
- Vacuum Transformer Oil Purification Machine Mounted On Mobile Trailer
- Lube (Turbine/Hydraulic) Oil Purifier
- Single Stage Vacuum Transformer Oil Purifier
- Vacuum Dehydration Oil Purification System
- Insulating Oil Purifier
- Portable Oil Filter Machine
- Coalescing Type Oil Purifier
- Disc-type Centrifugal Oil Separator
- Diesel (Fuel) Oil Filtration System
- Oil Filter Press Machine
- Vacuum Pump Unit
- Air Drying Purification System
- Testing Equipments
- SF6 Gas Treatment Plant
- Accessories: oil filters, vacuum/roots pump, filtering tanks, oil pump, oil blender,etc
Acore Filtration Co. Ltd.
- Tel : +86 132 06063693
- Email : sales@acorefiltration.com
- Mobile & Whatsapp : +8613206063693
- Fax : +86 23 8132 4618
- Add : No.2, Jianhe Road, Banan District, Chongqing, China
November 1,2021.
Acore Filtration Co.Ltd sales two sets of VPS250(250m3/h) Vacuum Pump Machine and one set of PF70(4200L/H) Oil Filter Press to Paraguay, The Vacuum Pump Unit is composed of rotary vane vacuum pump and mechanical root pump. Roots pumps cannot be started and directly exhaust the atmosphere under normal pressure and higher pressure, so a backing pump is required.
VPS250 Vacuum Pump Unit can reach a pumping rate of 250m3/h. It is suitable for working conditions with extremely large system gas volume. The Vacuum Pump Machine widely used in vacuum smelting, vacuum drying, vacuum immersion, vacuum distillation, aviation/aerospace experiments, gas transportation, power station dust collection and other occasions. VPS250 Vacuum Pump Unit has low energy consumption, high efficiency and good durability.
PF70(4200L/H) Oil Filter Press is a kind of filtration equipment with a wide range of applications. The oil filter press consists of filter plates and filter frames that are alternately arranged on the frame and can slide on the frame. The single plate frame is a rectangular hollow frame, which is divided into a washing plate, a non-washing plate and a middle partition frame. There are small holes parallel to the board surface on the thickness center line of the corners of the frame, and the through holes perpendicular to the board surface at the corners communicate with both sides of the board surface to form fluid flow channels.