TOP30(1800Liters per hour) vacuum Turbine Oil Purification Plant are developed and produced by new types of aggregation, separation technology for treatment of turbine oil with large water content, emulsification and impurities. It is suitable for the deep dehydration and purification of waste or used steam turbine oils, hydraulic turbines oil and other turbine lube oils.

During Turbine Oil Purification Plant working, the oil is entered into the initial filter through the entrance under the influence of the internal and external pressure difference. The large particles impurities are filtered out. Because the sewers use the interaction force of the interaction of the two -phase interface of the oil and water, the interactive force of the two -phase interface of the oil and water is used to accelerate the fine water droplets in the oil, and the large water droplets are separated from the oil. In the middle, the oil is then removed by the fine particles in the oil, and the liquid enters the vacuum tank. The vacuum flashing technology is used to remove the remaining trace water in the oil. Water oil is output through the oil pump to complete a process of oil.

Turbine Oil Dehydration Plant can quickly and efficiently remove the moisture, gas, and impurities in the oil. Make the used oil products to the new oil standards, ensure that lubrication system of turbines is working normally, and the maintenance cycle of the unit is extended. Contact us at: sales@acorefiltration.com