Lube oil for turbine is mainly composed of additives such as base oil, antioxidant, anti-rust agent, and anti-foaming agent. It is widely used in the lubrication of steam turbines, gas turbines and turbo compressors, turbo chillers, turbo blowers, turbochargers, turbo pumps, and bearings of power plant equipment for large and medium ships and warships. Turbine oil is easier to emulsify. There are three reasons for emulsified turbine oil. One is water, the other is emulsifier, and the other is high-speed stirring. The ingress of oil and water is an important reason for emulsification. Water breaks the combination of oil molecules. Due to the lack of tight seal of the shaft of the unit, the leak of the steam seal, the poor quality of lubricating oil, and the insufficient vacuum of the bearing box and the oil tank, etc., many factors. When the turbine oil is running, the unit has not reached cleanliness during installation and operation, and various impurities and stains penetrate into the oil. It caused an emulsified, white, viscous liquid. So the emulsified turbine oil should use Vacuum Lube Oil Purifier to Purify.

If the emulsification of the turbine oil is not serious, it can still be used again. The use of emulsified turbine oil has a great impact on the equipment, which can cause serious corrosion of the slide valve and sleeve in the equipment, causing the slide valve to become less stuck. Adjust the system sensitivity. It causes friction of the equipment and insufficient heat dissipation, leading to mechanical and electrical problems. Therefore, the turbine oil emulsification can no longer be used, and frequent renewal causes waste.

The emulsified turbine oil can be recycled and reused by Turbine Oil Purifier. Turbine oil emulsification is inevitable, but it can extend the use time. It can be done in a few steps.

1. When buying turbine oil, buy better quality turbine oil. New turbine oil can also be filtered and reused.

2. Using Turbine Lube Oil Purifier to separate impurities, water and gas in the turbine oil.

3. Add demulsified materials to improve the emulsification performance of turbine oil.

The use of a Turbine Lube Oil Purifier can separate impurities and moisture in the oil through physical means. Turbine Oil Purifier is made of high-carbon steel or 304 stainless steel. It can be vacuum dehydrated and degassed, agglomerated and demulsified, and multi-stage filtered to remove impurities. ACORE Filtration Co. Ltd also can manufacture new vacuum Turbine Lube Oil Purifier with coalescing filters, which combines the advantages of vacuum dehydration and coalescing dehydration, which not only remove mass free water, but also can remove dissolved moisture from oil.